Taurus POLO 3000 Bedienungsanleitung Seite 8

- Do not force the appliance's work capacity.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach
of children and/or those with reduced physical,
sensorial or mental abilities or who are unfami-
liar with its use.
- Keep the appliance in a dry, dust-free place,
out of direct sunlight.
- Do not operate on areas which contain metal
objects such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ash, nails, etc.).
SERVICE:
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
VACUUMING FUNCTION:
- Fit the hose unit to the vacuum cleaner's air
intake.
- To disconnect the hose unit from the vacuum
cleaner, press the two buttons on the hose joint
at the same time and pull outwards (Fig. 1).
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP:
- The appliance's grip is designed in such a
way that it allows the insertion of the following
accessories: (use the combination that best
meets your requirements).
- Extendable extension tube: Designed to
provide access to surfaces which are out of
reach and make floor cleaning comfortable, its
length can be adjusted by using the adjustment
control.
- Vacuum cleaner base: Specially designed for
cleaning floors (both rugs, carpets and hard
floors), its base has a retractable brush that
can be adjusted to two heights for greater ef-
ficiency on these floors. It is advisable to have
the brush out for hard floors and the brush in
for rugs and carpets.
- Lance: specially designed for getting into
cracks and difficult corners.
- Multi-use brush
USE:
- Take the length of cable required out of the
housing.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
(H)
ELECTRONIC POWER CONTROL:
- The power of the appliance can be regulated
by using the power regulator control (G). This
function is very useful, as it makes it possible
to adapt the power of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
(H)
- Unplug the appliance to the mains.
- Retract the cable by pressing the roller cable
button and guide the cable into the appliance.
(F)
CORD HOUSING
- This appliance has a cable compartment situa-
ted on its posterior (N).
CARRY HANDLE/S:
- The device has a handle on the back so it can
be transported easily and comfortably (K)
PARKING POSITION:
- This appliance has two parking positions for
comfortable and straightforward storage.
- To make use of the vertical parking put the
appliance in a vertical position (so that the back
part of the appliance is now leaning against the
floor) secure the hook of the head to the hook
which can be found on the lower part of the
appliance (Fig. 2).
- To use the horizontal parking position, fix the
break pad hook to the hook situated on the rear
side of the appliance (Fig. 2).
CLEANING
- Disconnect the appliance from the mains and
let it cool before undertaking any cleaning task.
- Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.