Using The Network Standby On Function; Using The Auto Power Link Function - Samsung HW-H750 Bedienungsanleitung

USING THE NETWORK STANDBY ON FUNCTION

The Network Standby On function becomes available if wireless connection was properly established between the
smart device and Soundbar. This function turns on the Soundbar automatically when a smart device attempts to
connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth connection, its input
mode is set to BT automatically. Turning on the Soundbar via Wi-Fi is available only by using the App. For further
information, refer to the Web manual.
1. Connect the Smart device to your Soundbar.
2. Turn the Network Standby On function on by pressing the $ button on the Soundbar remote for more than 5
seconds. You can turn the function off by pressing the $ button again for more than 5 seconds.
● Available only if the Soundbar is listed among the Smart device's paired devices. (The Smart device and the
Soundbar must have been previously paired at least once.)
● Soundbar will appear in the Smart device's searched devices list only when the Soundbar is displaying
[BT READY] or [WiFi READY].
● In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device.
● If Network Standby On function did not work
- The Network Standby On is set to Off.
● Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the power was
cut off. Turn on the Soundbar and reconnect.

USING THE AUTO POWER LINK FUNCTION

If Soundbar was connected to an external device with optical cable, AUTO POWER LINK function can be used.
If you connect the main unit to a TV with a digital optical cable, set the Auto Power function ON to have the Soundbar
turn on automatically when you turn the TV on.
1. Connect the Soundbar and an External Device with
an Optical cable.
2. Press and hold the DIMMER/Anynet+ button for
over 5 seconds to toggle the function.
AUTO POWER LINK
ON
OFF
23
FUNCTIONS
Display
ANYNET+ OFF /
POWER LINK ON
ANYNET+ ON /
POWER LINK OFF