Cleaning And Care - UNITED OFFICE KH 4419 Bedienungsanleitung

3. Insert the plug into a mains power socket .
4. Switch the appliance on by pressing the ON /
OFF switch 4. The red control lamp
glows.
• As soon as the green control lamp
glows the appliance has reached its operating
temperature. Additionally, an acoustic signal
sounds.
5. Select a suitable thermal binder cover for your
document:
Number
of sheets
80g/m
2
20
30
60
6. Tap the sides of the sheaf of papers a few times
to ensure that ALL of the sheets are lying exactly
above each other.
7. Lay the sheets into a suitable thermal binder cover
and then tap them down a couple of times, against
and using the cover spine.
8. Slide the complete thermal binder brochure into
the binder shaft 1 until the spine of the brochure
makes firm contact with the hotplate on the floor
of the thermal shaft 1.
9. Press the START 5 button. The control lamp
glows, the control lamp
10.As soon as an acoustic signal sounds and the
control lamp
remove the thermally bound brochure from the
binding shaft 1. Place it in the document holder
2 so that the adhesive can harden. The binding
is sufficiently hardened after approx. 60 seconds.
7
6
Brochure
thickness in mm
2 mm
3 mm
6 mm
6 blinks.
6 glows constantly you can
11. After use, place the ON/OFF switch 4 at O
and remove the plug from the mains power
socket.
Note:
Depending on the thickness of document, it is possible
that the binding process must be repeated several
times. For documents with a binding spine of 20 mm
or more (200 sheets), you must repeat the binding
procedure approx. 5 times.

Cleaning and care

Risk of potentially fatal electrical
shock:
• Always remove the plug from the mains power
socket before you clean the appliance!
• Never open the housing of the appliance.
There are no user-serviceable elements inside.
• Never submerse the appliance into water or
other liquids!
³
Allow the appliance to cool down completely.
³
Clean the surface of the housing with a slightly
damp wash cloth.
³
Ensure that moisture c
7
- 4 -