Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RCA Connection
S-Video Connection
3.3
Install
Once you have installed the batteries in the
remote and connected all of the appropriate
cables, you will need to do a quick "pairing" of
the dock with the remote.
D
Note
It is recommended to complete the initial set-up,
including the "pairing" sequence before docking
your iPod™ in the docking cradle.
Pairing the dock with the remote for
the first time:
1. Press the
POWER
2. Position the remote within 1m of the
dock for this duration of this procedure.
3. Follow the easy on-screen set-up wizard
screen prompts.
The easy on-screen set up wizard will guide you
through the different steps on the initial set-up
of your universal remote for iPod™.
Initial set-up of your universal remote for
iPod™:
10
Button on the remote.
1.
Select the language for your instructions
on the remote using the cursor keys.
Press
.
OK
While pairing the remote to the docking cradle,
position the remote within 1m of the dock for
the duration of the procedure.
D
Note
While your iPod™ is docked in the cradle, your
iPod™ screen will show the message below.
This is normal operation.
2.
Select "Next" and press
3.
Confirm if you want to add other devices,
like your TV or DVD player, by selecting
"Yes". Press
OK
original remote controls with the universal
remote for iPod™.
.
OK
. This replaces the devices'
Getting Started
Werbung
Kapitel
