Canon Pixma TS8100 series Kurzanleitung Seite 4

2
3
4
5
2
a C OMPLETELY remove the orange tape.
b R emove the protective wrap.
GENTLY.
Insert the ink tank into the print head and push it
Install all the ink tanks the same way as in step
4, and then confirm that all the colors appear on
screen.
The color of the ink tank that you set appears on
screen.
If the color is not displayed on the screen even
though you have installed the ink tank, the color
of the ink tank may be wrong or you may have
installed an ink tank, such as one with a different
model number, that is not supported by this printer.
Either install an ink tank for the correct color or use
the provided ink tank for setup.
Do not push the both sides of the
ink tank with the Y-shape air hole
blocked.
b
Hook the orange cap with your finger to remove it
down firmly until it snaps into place.
Do not touch.
a
6
1
2
4. Loading Paper / Aligning
Print Head
LIFT UP the scanning unit / cover, and then close
it.
a P ull out the cassette.
b R emove the cassette cover.
Open the paper guides, and then align the guide in
front with the mark of LTR or A4.
If an error message appears on the screen, make
sure the ink tanks are installed correctly.
To obtain a better print result, print a pattern for Print Head
Alignment and scan it.
a
b