Canon Pixma TS8100 series Kurzanleitung Seite 3

1
2
3
4
1. Checking Included Items
2. Removing Packing
Materials / Turning on
Printer
Remove the packing materials (such as orange
tape and protective film on the touch screen) from
outside the printer.
a H ook the hollows on the both sides of
scanning unit / cover.
b R emove the orange tape.
LIFT UP the scanning unit / cover, and then close
it.
Connect the power cord diagonally from the back.
When printing starts, the operation panel lifts up
automatically and the paper output tray comes out. Do
not put anything in front of the printer.
may cause malfunction.
Do not connect any cables except the power cord
yet.
□ Setup CD-ROM for
Windows PC
Back
□ Power cord
Using the printer with the protective film attached
the printer with your fingers and open the
a
b
□ Ink tanks for setup
□ Safety and Important Information
□ Getting Started (this manual)
5
6
7
8
1
3. Installing Ink Tank
Lift the operation panel and press the ON button.
Drag the screen and tap the language to select.
Read the messages and follow the on-screen
instructions.
Select OK.
Open the scanning unit / cover.
For details about information that is sent to Canon,
refer to "Sending Data To Canon" in Safety and
Important Information.
Do not touch the print head holder (A) until it
stops.
(A)
1