Bose 700 Bedienungsanleitung Seite 43

SYMPTOM
Soundbar doesn't
play audio from the
correct source or
selects the incorrect
source after a delay
Soundbar and source
do not power on/off
simultaneously
Soundbar doesn't
connect to Wi-Fi
network
Soundbar doesn't
connect to mobile
device
TR OUBL ES H O OTI N G
SOLUTION
Set CEC to Alternate using the Bose Music app.
Disable CEC on your source (refer to the source owner's guide for
more information).
Connect to the soundbar using both the HDMI cable (see page
47) and the optical cable (see page 48).
On the remote, press the source button for the source that is out
of sync.
Press the Power button I to power on/off the source.
In the Bose Music app, select correct network name, and enter the
network password (case-sensitive).
Make sure the soundbar and your mobile device are connected to
the same Wi-Fi network.
If your network information has changed, see page 17.
Enable Wi-Fi on the mobile device you are using for setup.
Close other open applications on your mobile device.
Restart your mobile device and router.
If your router supports both 2.4GHz and 5GHz bands, make sure
both your mobile device and the soundbar are connecting to the
same band.
NOTE: Give each band a unique name to make sure you're
connecting to the correct band.
Reset the router.
Unplug the power cords for the soundbar and optional bass module
or surround speakers, wait 30 seconds and firmly plug them into
the AC (mains) outlet. Uninstall the Bose Music app on your mobile
device, reinstall the app and restart setup.
Connect to the network using an Ethernet cable.
On your mobile device, turn the Bluetooth feature off and then on.
Delete the soundbar from the Bluetooth list. Connect again
(see page 31).
Connect a different mobile device (see page 31).
Make sure you're using a compatible Bluetooth mobile device.
NOTE: You can't connect Bluetooth headphones to the soundbar.
Remove the soundbar from your mobile device Bluetooth pairing list
and connect again (see page 31).
Clear the soundbar device list (see page 32) and connect again
(see page 31).
4 3
|
E N G