Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS
PRODUCT
Thank you for choosing a Sanus Foundations Component Series Rack. The CFR144 is designed to support audio/video
equipment.
The total weight capacity for the CFR144 is 453.6 kg (1,000 lbs), each 3U shelf supports up to 36.3 kg (80 lbs) and each 1U shelf
supports up to 13.6 kg (30 lbs).
CAUTION:
Avoid potential personal injuries and property damage!
Do not exceed the stated weight capacities.
Do not shake, tilt, rock, sit, stand, or climb on your Component Series Rack. Tipping may cause injury or death.
Do not move large racks by yourself; due to weight and height, assistance is required.
Use extreme caution when moving a loaded rack! Push, DO NOT pull, loaded rack slowly over a short, smooth, level
distance. Avoid sudden starts and stops to minimize the strain placed on casters.
Do not use this product for any purpose not explicitly specifi ed by manufacturer.
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this
product, contact manufacturer Customer Service or call a qualifi ed contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
NOTE: Due to continuous product improvement, images shown in this manual may vary from actual product.
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
Supplied parts are located inside of the rack. To access the parts:
1.
Remove side panel to access keys.
2.
Insert key into door lock and turn clockwise; pull door handle out and turn counter clockwise.
3.
Open door and remove supplied parts.
1
4
English
CAUTION:
3
2
1
2
6901-002086 <00>
Werbung
