Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REVERSING THE FRONT DOOR
1.
Unattach door grounding wire from bottom of rack.
CAUTION:
To avoid damage to the grounding wire, remove the grounding wire before removing the front door.
2.
Pull upper and lower door pins to release door from rack.
3.
Remove spacer from pin and place on opposite pin.
NOTE: Spacer must be used with pin on bottom of door.
4.
Flip the door and insert pins into mounting holes on rack.
5.
Flip the door handle.
a.
Remove screws and bracket.
b. Flip the door handle.
c.
Reattach screws and bracket.
d. Loosen the locking cam screw.
e.
Flip the locking cam tab to the side nearest the edge of the door.
f.
Tighten the locking cam screw.
6.
Reattach door grounding wire to top of rack.
1
6901-002086 <00>
OPT
2
2
9
15
Werbung
