Teleco TVHET868A02 Handbuch Seite 9

Memorization of one transmitter push-button with 100% function
10 -
The push-button memorised adjust the load at the maximum value.
P1
6 times
and hold down
1- Press the push button P1 six
times and hold it down, the
buzzer will make a beep each time
and then sound continuously.
11 - To delete a transmitter
P1
7 times
and hold down
1- Press the push button P1
seven time and hold it down,
the buzzer will make a beep
each time and then sound
slowly and intermittently.
12 - To delete all transmitter
P1
8 times
and hold down
13 - To copy a function of transmitter push-button to a new transmitter
The new transmitter will have the same functions as the transmitter used for the memorization.
Memorized
transmitter
1- Press the button P3 located
inside the already memorized
transmitter. The enabled
receiver sounds continuously.
2- During the sound press the push-
button which has to be memorised;
the memorization is indicated by the
intermittently sound of the buzzer.
2- During the sound press the push-button
which has to be deleted; the deletion is
indicated by the continuously sound of the
buzzer.
1- Press the push button P1 eight time and hold it down, the buzzer will
make a beep each time and then sound quickly and intermittently.
2- Hold down the push button for 10 sec., after this 10 sec. the buzzer
will sound continuously by indicating that the whole memory has been
cancelled.
Memorized
transmitter
P3
2- Within 5 seconds press a push-
button of the already memorized
transmitter from which the function
has to be copied. The buzzer will
interrupt the sound for 1 sec., and
then will carry on for 5 seconds.
9
New transmitter
3- During the sound press
the push-button of the new
transmitter which has to be
memorised; the memorization
is indicated by the intermittently
sound of the buzzer.