Fm Mode; Mport Mode - Revo Pico Radio Station Bedienungsanleitung

Pico RS Manual.qxd

FM Mode

FM Operation
Extend the telescopic antenna found on the
rear of Pico.
Enter FM Mode by pressing the MODE
key and switching between DAB Mode
and FM Mode. Alternatively, FM Mode
can be accessed via the Main Menu.
If this is the first time Pico has been in FM
mode, it will start at the beginning of the FM
frequency range. Otherwise, the last FM
station you were listening to will be selected.
To scan through the FM frequency range
turn the scroll wheel.
To 'SEEK' the next active station, press the
scroll wheel.
Favourite Station Presets
Pico allows you to store 12 favourite station
presets, either via the PRESET button on Pico
itself, or on the optional Pico remote control.
To save the station you are currently
listening to as a preset, simply press the
PRESET button then use the scroll wheel to
find an unused location. Now press the
scroll wheel to store.
To listen to a stored station press the PRESET
button then use the scroll wheel to locate your
desired preset, then press to select.

MPort Mode

Using MPort
Revo's MPort connector allows for quick
and easy connection of an iPod®, similar
MP3 player or sound source.
Using the connection lead supplied, Pico is
transformed into a high quality digital
audio speaker system.
Connect one end of the supplied audio
lead to the headphone (or auxiliary out)
socket of your source device, then
connect the other end to the MPort
on the front of Pico.
Now press the MODE key and cycle
through the options until 'MPort Mode' is
displayed.
Pico's LCD screen will now display the
word 'MPort' on its screen.
You should adjust the output volume level
on both the source device and on Pico
itself to gain optimal volume levels and
sound performance.
4/10/08 17:35 Page 13
MODE FM Mode
87.50Mhz
> Preset 1 unset
> Preset 2 unset
> Preset 1 set
> Preset 2 unset
MPort Mode
M-Port
English
FM
13