Use More Of Your Micro System; Set The Sleep Timer; Set The Alarm Timer; Listen Through Headphone - Philips MCM280D/12 Benutzerhandbuch

10 Use more of
your Micro
System

Set the sleep timer

This unit can switch to standby automatically
after a preset period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
»
When sleep timer is activated, the
display shows
To deactivate sleep timer
1
Press SLEEP repeatedly until "SLP OFF" is
displayed.
»
When sleep timer is deactivated,
disappears on the display.

Set the alarm timer

This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER
for more than 2 seconds.
3
Press CD, TUNER, USB, iPhone/iPod to
select a source.
4
Press TIMER to confi rm.
»
The hour digits are displayed and begin
to blink.
5
Press VOL +/- to set the hour.
6
Press TIMER to confi rm.
»
The minute digits are displayed and
begin to blink.
7
Press VOL +/- to set the minute.
.
8
Press TIMER to confi rm.
»
The timer is set and activated.
Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
»
If the timer is activated, the display
shows .
»
If the timer is deactivated,
disappears on the display.
Note
•
If disc/USB device source is selected and the track
cannot be played, tuner is activated automatically.

Listen through headphone

1
Plug a headphone into the
the unit.
socket on