Fm Reception; Storing Fm Stations - Imperial CAR 1 Bedienhandbuch

5. OPERATION

5.5. FM reception

To receive analogue VHF radio stations with the device, a VHF search must be performed.
E
> To do this, switch to FM mode using the mode button (2).
> Press the MOD button (2) repeatedly until FM is displayed. The device is now in FM mode.
> Press the button I<< or >>I (1) / (6) for about 2 seconds to start the VHF scan.
The radio will search for the next available station.
Once the radio has found an available station, the scan will stop automatically.

5.5.1. Storing FM stations

You can store VHF radio stations using the station memory buttons.
> Search for a VHF station that you want to save. (Section 9.6)
> Press and hold the desired station preset button for approx. 2 seconds.
The display will show STORED. The station is now saved in the desired position. NOTE:
You can store a total of 18 stations.
6 station memory buttons on the device in 3 memory banks F1-- F3
To change the memory bank, press the button BND (5) in the FM / VHF Reception.
Operating Manual - Installation Instructions
BDA_CAR_1_11_18.indd 54
54
FM
87. 5
92. 4
STORED
04.12.18 12:42