Setting The Time; Select Operating Modes - Imperial CAR 1 Bedienhandbuch

5. OPERATION

5.2.1. Setting the time

The radio has a clock display, which is usually set automatically via radio reception. If necessary, the time can also be set manually.
Note: Manual clock setting works only if no radio signal can be received.
E
Hinweis: Note: Manual clock setting works only if no radio signal can be received.
> Press the button CLK (11)
> The time is displayed.
> Press and hold the button CLK (11).
> The hour indicator flashes.
➢> Use the rotary control (3) to select the desired time and confirm
by pressing the rotary control (3).
➢ The minute display flashes.
➢> Use the rotary control (3) to select the desired time and confirm
by pressing the rotary control (3).

5.3. Select operating modes

The radio has several operating modes.
DAB
FM
USB
SD
AUX
Operating Manual - Installation Instructions
BDA_CAR_1_11_18.indd 50
Radio reception of the digitally transmitted DAB signal
Radio reception of the analog VHF radio signal
Music playback via a USB data carrier connected to the device
Music playback via a micro SD card inserted in the SD card reader
Playback from an audio device connected to the unit via the AUX jack (19).
50
15:09
18:10
04.12.18 12:42