Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*Date code 201811475B or later
**Date code 201536 or later
enGLiSh
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: Improper operation or maintenance of
this product could result in serious injury and property
damage. Read and understand all warnings and
operating instructions before using this equipment. When
using air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
Do not use damaged, frayed or deteriorated air hoses
and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may
be harmful to your hands and arms. Stop using any
tool if discomfort, tingling feeling or pain occurs. Seek
medical advice before resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
Always wear hearing protection when operating
this tool.
Always wear eye protection when operating or
performing maintenance on this tool.
6.2 Bars
(90 PSI/
620 kPa)
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any
6.2 Bars
Lorem ipsum
(90 PSI/
6.2 Bars
620 kPa)
(90 PSI/
maintenance on this tool.
620 kPa)
Lorem ipsum
Lorem ipsum
Operate at 6.2 Bar (90 PSI) Maximum air pressure.
6.2 Bars
(90 PSI/
620 kPa)
WARNING:
Lorem ipsum
•
Prevent unintentional starting. Ensure the trigger is
in the off position before connecting to air source,
picking up or carrying the tool. Carrying air tools with
your finger on the switch or energizing air tools that
have the switch on invites accidents.
•
Do not operate this tool for long periods of time.
Vibration caused by tool action may be harmful
to your hands and arms. Stop using any tool if
discomfort, tingling feeling or pain occurs. Seek
medical advice before resuming use.
•
Store idle air tools out of the reach of children and
do not allow persons unfamiliar with the air tool or
these instructions to operate the air tool. Air tools are
dangerous in the hands of untrained users.
•
Do not use oxygen or reactive gases; explosion
may occur.
26
6.2 Bars
(90 PSI/
620 kPa)
Lorem ipsum
6.2 Bars
(90 PSI/
620 kPa)
Lorem ipsum
6.2 Bars
(90 PSI/
620 kPa)
Lorem ipsum
•
Exceeding the maximum pressure of 6.2 Bar (90 PSI)
will lead to the risk of danger such as excessive speed,
tool wear, breaking parts, higher torque or force that
may destroy the tool and its accessories or the part
being worked on.
•
Read all manuals included with this product carefully.
Be thoroughly familiar with the controls and the
proper use of the equipment.
•
Only persons well acquainted with these rules of safe
operation should be allowed to use the air tool.
•
Do not exceed any pressure rating of any component
in the system.
•
Disconnect the air tool from air supply before
changing tools or attachments and during
non-operation.
•
Always wear safety glasses and ear protection during
operation. Always wear approved safety glasses with
shields. Always wear approved hearing protection.
•
Do not wear loose fitting clothing or apparel which
contains loose straps or ties, etc. Which could become
entangled in moving parts of the tool and results in
serious personal injury.
•
Do not wear jewellery, watches, identifications,
bracelets, necklace, etc. When operating any tool, they
may become caught in moving parts and result in
serious injury.
•
Do not depress trigger when connecting the air
supply hose.
•
Always use attachments designed for use with air
powered impact tools.
•
Do not use the tool if it has been damaged.
•
Use rated accessories recommended by FACOM only.
Inspect accessories before use. Do not use cracked
or damaged accessories. Just because the accessory
can be attached to your air tool, it does not assure
safe operation.
•
Never trigger the tool when not applied to a work
object. Attachments must be securely attached. Loose
attachments can cause serious injury.
•
Protect air lines from damage or puncture.
•
Never point an air tool at oneself or any other person.
Serious injury could occur.
•
Check air hoses for weak or worn condition before
each use. Make sure all connections are secure.
•
Keep all nuts, bolts and screws tight and ensure
equipment is in safe working condition.
•
Keep hands and other body parts, loose clothing and
long hair away from the moving end of tool.
•
Accessories and tools can get hot during operation.
Wear gloves when touching them.
•
Do not discard the safety instructions; give them to
the operator.
•
Do not modify this tool. Modifications can reduce the
effectiveness of safety measures and increase the risks
to the operator.
Werbung
Inhaltsverzeichnis
