Preparing The Camera - CAMPARK T20 Bedienungsanleitung

▲ 1. The monitor is only switched on in the SETUP mode for changing
menu settings or viewing existing photos and videos.
2. A SD memory card must have been inserted into the memory card
slot to save photos and videos.
3. Using the mini USB connection (USB 2.0), the camera can be
connected to a computer to download photos and videos.
4. Using the mode switch, the three operating modes:OFF,SETUP and
ON can be selected.

4. PREPARING THE CAMERA

Note :
1. SD memory cards up to a capacity of 32 GB are supported.
x4
2. 4 new LR6（AA）
Batteries with tghe same specification.
3. The camera must be inserted 4 x 1.5V AA batteries . Do not use
new and old batteries together. DC interface need 6V/1.5A adaptor
with 3.5 mm (outer diameter) 1.3 mm (inner) plug head.
4. Insert CLASS6 or higher class SD card (CLASS10 recommend).
Prior to insert into memory card, ensure that the lateral write protection
on the memory card has not been locked.
x1 x1
5
EN