Cleaning And Maintenance - Cuisinart SG6BE Bedienungsanleitung

5. CLEANING &MAINTENANCE
The appliance is safe to be left plugged into the electrical supply when not in
use to ensure the batteries are always charged. However, the product should
be switched off and unplugged before cleaning, removing or attaching the
grinding containers to refill with salt, pepper or spices, or when handling any
parts that are intended to move. It should also be unplugged if not being used
for a prolonged period of time.
• Clean the mill and base by simply wiping all parts with a damp cloth and
thoroughly drying. Do not expose the appliance to moisture.
• Do not use detergents to clean it.
• To clean the grinding chambers, simply unlock the container, remove and
wash with warm soapy water. Dry thoroughly and replace.
To clear a peppercorn that is stuck in the grinding wheel you may either:
Turn the mill upside down and shake gently while pressing the
On/Off power button.
Turn the mill upside down and position the grind selector to
coarse, then hold over a plate and grind until peppercorn is
dislodged.
• Never use moist or wet spices in the mill. This will clog the grinding mechanism.
We recommend using only store-bought dried spices.
N.B. Never immerse the full appliance in water, any other liquid or place in a
dishwasher.
In some instances grinds can become lodged between the metal spindle in
each of the grind containers and the main power unit. If this happens, the unit
will not function. The motor will not start when the ON/OFF button is pressed.
To dislodge loose grinds, remove each of the removable grind containers in turn
and shake the main power unit to release any loose grinds. There is no need to
empty the containers. Replace the grind containers and use as normal.
Loose grinds can get lodged inside this hole
15