Dry-Boil Protection; Cleaning And Maintenance; Descaling - Saba BSF MG15 CI Bedienungsanleitung

Dry-boil protection

If you inadvertently use the kettle with no water in it, the dry-boil protection system will
automatically switch it off� If this happens, leave the kettle to cool down before filling it with cold
water and boiling it�

Cleaning and Maintenance

Before cleaning the kettle, always unplug it from the electrical
outlet and wait until it has cooled completely�
1� Never immerse the kettle, its power cord or its power supply
base in water and make sure that they never come into contact
with water�
2� Wipe the outside of the body with a wipe or a damp cloth but
never use a toxic cleaning product�
3� Do not forget to clean the filter regularly� To clean it more
easily, detach the filter by pushing it downwards in the kettle
and replacing it after cleaning it�
GB
WARNING: Do not use chemical products, steel or wooden
utensils, nor abrasive cleaning products to clean the outside of
the kettle to prevent loss of shine�
4� The power cord can be coiled under the kettle when not using
the toaster for long periods or when storing the appliance�
68

Descaling

Your kettle must be descaled periodically because the limescale content in tap water can cause the
formation of limestone at the bottom of the kettle and a loss of efficiency in its use� You can use a
commercially available descaler and follow the instructions contained on its packaging� You can also
follow the instructions below using white vinegar�
1� Fill the kettle with 3 cups of vinegar, and then add enough water to completely cover the bottom
of the kettle� Leave the solution to rest in the kettle overnight�
2� Then throw this mixture out and fill the kettle with clean water up to the maximum level�
Let the water boil and discard the water� Repeat several times until the odour of vinegar has
disappeared� The remaining marks in the spout can be removed by wiping with a damp cloth�
GB
69