Perlesmith PSXFK1 Montageanleitung Seite 7

STEP 2B Wood Stud Option
WARNING:
Avoid potential personal injury or property damage! All lag bolts [A] MUST
BE firmly tightened to prevent unwanted movement of the wall plate [01] .
WARNING:
Ensure the wall plate is securely fastened to the wall before continuing on to the
next step.
WARNING:
Avoid potential personal injuries and property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in.
(38 x 89 mm)
● Stud center must be verified
2B-1
2B-2
01
Locate your studs. Verify and
mark the center of the studs
by finding the stud edges
using an awl, a thin nail, or an
edge-to-edge stud finder.
Position the wall plate
[01] at your desired
height and line up the
holes with your stud
center line. Level the
wall plate and make the
holes.
X
P6