Optional Accessories - Aftershokz AEROPEX Bedienungsanleitung

How to Reset Your Headphones
1. Start with your headphones powered off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says "pairing"
and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button and volume- button
(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or
feel vibrations.
4. Turn your headphones off. Aeropex is now reset and can be re-paired to your device.

Optional Accessories

12
Earplugs (D)
Use with headphones in environments where it is safe to block out ambient noise,
such as on a train or airplane.
1. Roll earplugs firmly between fingers and place in ears.
2. While music is playing to adjust EQ settings to reduce or enhance bass while wearing
earplugs, press and hold volume+ and volume- buttons simultaneously.
3. Switch EQ to original setting when you take out the earplugs.
Manufacturer
AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057