Beta 1932B10 Bedienungsanleitung Seite 10

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
comfortable posture, and avoid awkward or off-balanced postures, or change posture to help avoid discomfort and fatigue.
Caution: If the pneumatic tool is used over a protracted period of time, part of the tool and the cutting tool may become hot.
Wear protective gloves.
Dust and fumes hazards: Depending on the type of material being worked, the fumes generated while operating the
pneumatic tool can cause diseases in humans. An appropriate environmental hygiene survey is required to determine the
type and degree of protection of the personal protective equipment to use for the respiratory tract.
Using the pneumatic tool on the workpiece generates noise, which may prove harmful to the exposed personnel.
A proper phonometric survey is required to determine the personal hearing protective equipment (hearing protection) to use.
If a specially conducted survey suggests that the daily exposure to vibration generated from the pneumatic tool exceeds the
limit value under the regulations in force in the respective country, anti-vibration gloves must be worn.
• If you notice that the skin of your fingers becomes numb, turns white, tingles or hurts, stop working with the pneumatic tool, inform
your employer and seek medical advice.
• Do not make the drill bit jump on the workpiece: this may result in significantly increased vibration.
• Hold the pneumatic tool with a not too firm yet secure grip, compliant with the required hand reaction forces.
• Never carry the pneumatic tool by the hose.
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR
PERFORMING MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental
hygiene/risk analysis survey if the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL
FOLLOWING A SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY
EXPOSURE OF HAND-ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE
VALUES FOUND IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
WEAR PROTECTIVE HELMET
10
EN I