Technical Data - IFM Electronic efector100 G15003 Betriebsanleitung

9. Technical data

Order no.: G15003
Electrical design:
Output function:
Operating voltage:
Auxiliary voltage:
Current consumption:
Current rating:
Voltage drop:
Short-circuit protection:
Output status indication:
Power-on delay time t
for enabling:
Response time:
page 24
50
LEDs
PNP and NPN solid-state outputs
switched if all connected units are enabled
with switch-off pulses of approx. 400 µs with a
period of approx. 300 ms
18 ... 30 V DC
18 ... 30 V DC
This supply voltage must be of type PELV.
200 mA + n x 15 mA
(n = number of the connected sensors)
< 200 mA
< 2.5 V (at max. load)
yes
LED
typ. 5 s (power on)
1 s for safety enabling
210 ms for safety requirement
105