Battery Replacement - DPM KY098YB Bedienungsanleitung

Detektor drewna, metalu i przewodów pod napięciem
6. If the wires are placed horizontally, the measurement should be carried out by moving the device up
and down.
Before the first use or when the battery indicator (7) is visible on the display, a new

battery must be installed  Place a new DC 9 V block battery, paying attention to
the correct polarity  Make sure that the connecting cables of the battery are not
crushed or damaged  It is recommended to use alkaline batteries  Used batteries as
hazardous waste should be thrown into specially marked containers or handed over to
a separate collection point. Do not dispose of batteries in the trash bin  Do not use
new and used batteries at the same time.
Description
J mode switch
K ON/OFF switch
L LCD screen
M detector sensor
N sound indicator
 AC live wires detection indicator
P used battery indicator
Q approaching to detected element indicator
R metal detection mode indicator
S AC wires detection mode indicator
 wood detection mode indicator
 detected edge of element indicator

Battery replacement

1. Before the first use or when the battery indicator P is visible on the display, a new battery must be
installed.
8