Belkin TuneFM Bedienungsanleitung Seite 6

Using the TuneFM Transmitter
The TuneFM transmitter function automatically turns on when the iPod is
connected. It automatically turns off when the iPod is removed.
1. Tune your stereo frequency to a channel with a weak broadcast signal.
The ideal channel is one that is not broadcasting a radio program, or is
doing so weakly.
2. Insert the TuneFM into your iPod nano. The iPod backlight will turn on
and the current transmitter frequency will be displayed on the iPod
screen.
3. Press the ▲ or ▼ button on the TuneFM to select the transmission
frequency chosen in step 1. The frequency will be visible on the
iPod nano's screen. Pressing and holding either button will provide faster
tuning.
4. After displaying the current frequency for five seconds, the iPod screen
will return to the iPod Main Menu. This happens whenever you make
changes to the TuneFM's settings. All settings, including transmission
frequency and stereo/mono control settings are permanently stored in
memory at this time.
Note: iPod playback will pause momentarily when entering and exiting the
TuneFM control menu. Playback will quickly resume.
Using the TuneFM Transmitter | 06
5356_F8Z125eaBLK_man.indb 6 16/1/07 9:36:59 am