Water Supply - Zanussi ZCOF 637 X Bedienungshandbuch Und Installation

WATER SUPPLY

• Take the lid off the water tank (ref.27) and take out
the Brita filter.
• Take the filter out of the packaging and soak it in
cold water for half an hour before fitting it firmly
into the hole in the tank (fig.6).
• Place the water hose in the relative channel (fig.7)
and push it down until it reaches the bottom of the
tank (fig.8).
• Fill the tank with cold water.
• Warning: fill the tank with cold drinking water
only: do not pour milk or any other liquid into the
tank!
• The Brita filter is available at shops selling
household appliances, at our Technical Service
Centres and at Authorised Spare Parts outlets.
Fig. 7
Fig. 6
Fig. 8
67