Fripac Mondial K-4232 Bedienungsanleitung Seite 14

Tips for use and operating instructions
Only curl the hot rollers in dry or slightly damp hair but never in wet
hair.
Comb through the hair well before use. If necessary, use a detangling
brush such as the Denman Tangle Tamer Ultra.
Plug the mains cable of the device into the socket.
Keep the cover closed while the hot rollers heat up. Make sure that all
of the hair rollers are on top of the heating elements.
Press the ‚⏼' button. The device will heat up and the ‚WORK' LED light
will light up red.
The hot rollers will be heated up after approximately 90 seconds. The
‚WORK' LED light will turn off and the ‚WARM' LED light will light up
green.
Open the cover of the device and select the desired size of hot rollers.
Separate a section of hair that is about the width of the hot roller and
slowly roll the roller into the hair from the tips to the scalp.
Use the clips included in delivery to hold the section of hair fi rmly in
place.
Let the rollers completely cool off in the hair. Then remove the clips
and carefully unroll the rollers.
To switch off the device press the ‚⏼' button and then unplug the mains
cable.
Nevertheless, always switch off and unplug the hot roller set when it is
not being used.
EN - User Manual K-4232 - 13