Fripac Mondial K-4232 Bedienungsanleitung Seite 12

use.
11. Make sure that the voltage indicated on
the label of the current iron corresponds to
the supply voltage. Supply voltage 220-240
VAC, 50/60 Hz, 600 W.
12. Do not place the device on sensitive surfa-
ces or close to fl ammable materials (e.g.
tin cans, plastic parts or containers that
could melt or catch fi re due to the hot sur-
face of the device). Only place the device on
a heat-resistant surface.
13. Always switch off the device after use. Al-
ways keep the device unplugged if you are
not using it or are cleaning it.
14. The device must not be operated if there
is damage to the mains cable or the plug
or if the device shows damage. If there is
a defect and/or a malfunction, immedia-
tely turn off the device and unplug it. If the
mains cable, the plug or the device itself
are damaged, never attempt to repair the
device yourself, as improperly executed
repairs can result in signifi cant dangers
for the user. Please contact your speciality
retailer.
15. The device must fi rst cool off before it can
EN - User Manual K-4232 - 11