Enrolment Procedure Of The First Three (Administrator) Fingerprints; Optional Step: Assignment Of An Additional Function - Inotherm inokey Bedienungsanleitung

ENROLMENT PROCEDURE OF THE FIRST THREE

OPTIONAL STEP: ASSIGNMENT OF AN ADDITIONAL FUNCTION

(THIS STEP SHOULD BE SKIPPED IF THE FINGERPRINT SHOULD ONLY OPEN THE DOOR)
2a
IF THE ADMINISTRATOR FINGERPRINT SHOULD TRIGGER AN ADDITIONAL
FUNCTION, PRESS BUTTON 1.
The orange LED will flash in a combination with a beep. The enrolled administrator fingerprint
will only trigger an additional function.
2b
IF THE ADMINISTRATOR FINGERPRINT SHOULD OPEN THE DOOR AND
TRIGGER AN ADDITIONAL FUNCTION AT THE SAME TIME, PRESS BUTTON 2.
The orange LED will flash twice in a combination with two beeps. The enrolled administrator
fingerprint will open the door and trigger an additional function at the same time.
3
THE FINGER SHOULD BE PLACED ON THE SENSOR.
SUCCESSFUL ENROLMENT WILL BE CONFIRMED BY A
FLASH OF A GREEN LED, ACCOMPANIED BY A SHORT
BEEP.
IF A DAMAGED OR AN EXTREMELY NON-
PROMINENT FINGERPRINT WILL TRY TO BE
ENROLLED, THE RED LED WILL FLASH 5 TIMES,
ACCOMPANIED BY 5 BEEPS AND THE OPERATION
WILL BE TERMINATED. A QUALITY, CLEAN AND
SUFFICIENTLY MOIST FINGERPRINT SHOULD BE
CHOSEN FOR ENROLMENT.
(ADMINISTRATOR) FINGERPRINTS
1
TO START ENROLING
FINGERPRINTS, PRESS BUTTON 1 ON THE CONTROL
UNIT.
The blue LED will start blinking slowly.
ADMINISTRATOR
1x
EN
BLUE
ORANGE
1x
ORANGE
2x
A
GREEN
1x
31