Managing Incoming Calls - Audiovox VME-9425 Bedienungsanleitung

10. A prompt to pair or bond should appear on your mobile phone. Accept the request
and initiate the process.
NOTE: Some mobile phones require a "pass key" or pairing code to connect.
If your phone requires a pass key or pairing code, you will need to enter this
number. The default pairing code for many wireless phones is "0000". The
default code for the unit is "1234".
11. A prompt to enter a PIN number or passkey for the unit should appear. The default
passkey for the unit is "1234".
12. At this point a prompt stating that pairing is successful should appear. Another
prompt should appear asking connect to the unit, Yes or No. Press Yes. The
mobile phone and the unit should connect. The mobile phone should display a
message similar to "Device Connected." The mobile phone and the unit are now
connected. VME 9425 will appear on the mobile phone list of devices.

Managing Incoming Calls

When connected to a Bluetooth® phone, the unit will mute audio output, pause
CD play, and change to the Bluetooth screen below when a call is received. The
incoming phone number or as-signed name for that number will appear in the top of
the screen. An audible tone will sound from the unit and a graphic display will appear
on the front panel. If the incoming call has no caller ID, the unit will display "Private
Caller".
Direct Entry icon: Touch to access the direct dial screen. Refer to the Direct Entry
•
screen for further detail.
• icon: Touch to answer an incoming call.
117