TomTom Car Connect Installationshandbuch Seite 8

bristol_qsg.book Page 9 Monday, September 18, 2006 2:14 PM
5. Tap Done.
6. The TomTom asks you to confirm that you want to use an
external Bluetooth Hi-Fi speaker. Tap YES. It will then start
searching for Bluetooth Hi-Fi devices.
7. Select Car Connect from the list of devices found by the
TomTom. It will then try to establish a Bluetooth
connection with Car Connect.
8. Set the volume on the TomTom to 80%. You can set the
volume using the Volume preferences in the Preferences
menu.
Test the connection. Once connected, sound should play
automatically through your speakers, using Car Connect.
If the connection is unsuccessful, all sound will be played
through the internal speaker or through the audio cable if it is
connected to the windscreen dock.
If the connection fails, visit www.tomtom.com for more
information or call TomTom support.
After successfully setting up the system, put all the existing
vehicle parts you removed back the way you found them.
Installation
9
EN