Playing Cds/Mp3; Programmed Play - AEG mc 4419 Bedienungsanleitung

English
48

Playing CDs/MP3

This is how you play a CD
1. Turn the function selector switch (19) to the „CD/
MP3" position.
2. In order to open the CD compartment (1), press the
button (4).
3. Insert an audio CD with the printed side facing
upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compart-
ment.
4. After a few seconds the total number of songs/tracks
is shown in the display.
NOTE:
In the case of CDs in MP3 format the number of
folders is briefl y displayed at fi rst.
5. Press the II PLAY/PAUSE button (21/6) in order to
play the CD. The CD will play from the fi rst title. The
track currently being played,
shown in the display.
6. In order to remove a CD, please press the
button (20/5), open the CD compartment and lift the
CD out carefully.
Always keep the CD deck closed.
NOTE:
• With CDs in MP3 format the current track and
folder are shown alternately in the display.
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -" and the word „NOd"
(no disc) appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
Description of the CD buttons
II PLAY/PAUSE (21/6)
You can briefl y interrupt and resume playback using this
button. The current track fl ashes in the display together
with the symbol. Pressing again continues
I / I (SKIP +/SKIP -) (8/9/2)
With an audio CD or a CD in MP3 format playing:
With I/SKIP + you can jump to the next or previous
track etc. If the button is kept pressed down, the machi-
ne starts to search through the tracks.
The I /SKIP - button can be used as follows:
Press once = This jumps back to the previous
track.
Press twice = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
05-MC 4419 CD/MP3 AEG .indd 48 05-MC 4419 CD/MP3 AEG .indd 48
The CD stops.
MODE (23/4)
With an audio CD or a CD in MP3 format playing:
Press once =
Press twice =
Press three times = the display contains the word RAN-
Press four times = all functions are cancelled. The
Only for CDs in MP3 format
DISC or MP3 are
Press once =
STOP
Press twice =
Press three times = the whole CD is played continuously
Press four times = the display contains the word RAN-
Press fi ve times = the function is deactivated and the
FOLDER UP/DOWN (1 on the remote control)
Press these buttons during playback in order to move
one folder upwards or downwards. The display, e.g.
F 01, appears briefl y. Then the CD begins to play back
playback.
automatically. If this button is pressed in stop mode the
display also appears briefl
II PLAY/PAUSE button

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the
2. Press the PROG(RAM) key (6/3). The word PROGRAM
STOP (20/5)
(the REP. emits a fi xed light) the cur-
rent track is repeated continuously.
(the REP. ALL emits a fi xed light) the
whole CD is played continuously.
DOM and the track number that is to
be played fi rst. All tracks are played
back in random order.
normal play mode is resumed.
the current track is repeated conti-
nuously (REP. appears in the display).
the selected folder of the MP3 CD
is repeated continuously REP. ALBUM
appears in the display). With the
FOLDER UP/DOWN buttons (1 on the
remote control) you can select the
individual folders.
(REP. ALL appears in the display).
DOM, MP3 and the track number
that is to be played fi rst. All tracks
are played back in random order.
CD is played in the normal mode.
y.
Then start playback with the
(21/6).
STOP key (20/5).
fl ashes in the display and „P01" (memory preset)
appears. Use the I / I
(8/9/2) to select the desired track and then press the
PROG(RAM) button again. The display changes to
memory slot P02.
(SKIP+/SKIP-) buttons
24.01.2008 15:27:11 Uhr 24.01.2008 15:27:11 Uhr