Cleaning And Maintenance; Technical Data - AEG mc 4414 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Seite von 90

/ 90
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

In order to call up the remaining time press the SLEEP button.

This time can also be subsequently shortened or switched off

again (00 Min).

TIMER (15 on the remote control)

You can set the device so that it switches on and off again at a

certain time.

1. Keep the TIMER button pressed down until „

in the display. The hours ﬁ gure begins to ﬂ ash.

2. Use the UP/NEXT

to select the switch-on time (hours).

3. Press the TIMER button and use the UP/NEXT

BACK/DOWN I

buttons (8/3) to select the switch-on

time (minutes).

4. When the TIMER button is pressed the word „

appears in the display. The hours ﬁ gure begins to ﬂ ash.

5. When setting the switch-off time, please proceed in the

same way as described above.

6. Press the TIMER button and use the UP/NEXT

BACK/DOWN I

button (8/3) to select in which mode the

radio should switch on (TUNER or CD).

7. Press the TIMER button and use the UP/NEXT

BACK/DOWN I

buttons (8/3) to select the switch-on

volume VOL.

8. Press the TIMER button again. The settings are shown in

the display brieﬂ y one after the other and then the device

switches back to the normal display. „ " appears in the

display and the timer is activated.

9. Then switch the device to standby operation with the

ON/OFF / POWER button (4/12).

In order to deactivate the timer, brieﬂ y press the TIMER button.

The word „ " disappears from the display.

PROGRAM (10/6)

This is used for setting the time, storing stations and program-

ming playback.

Keep this button pressed down fur approx. 3 seconds to call up

the time on the display. Press this button once more to return to

the radio frequency or CD/MP3 track display.

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the STOP key (16/2).

2. Press the PROGRAM key (10/6). „00 P-01" (memory

location) appears in the display (13) together with the word

MEMORY. In MP3 format the number of the ﬁ le (00) ﬂ ashes,

while the track number (000), the word MEMORY and the

memory storage number P-01 are shown. Use the

UP/NEXT

I / BACK/DOWN I

the desired track and then press the PROGRAM button

(10/6) again. The display changes to memory slot P-02.

3. Select the next track with the UP/NEXT

DOWN I

key and press the PROGRAM key again. Re-

peat the procedure until all the desired tracks are selected.

In MP3 format ﬁ rst select the folder. Press the PROGRAM

button and then select the desired track.

05-MC 4414 AEG 58

ON" appears

I / BACK/DOWN I

buttons (8/3)

I /

OFF"

I /

buttons (8/3) to select

I / BACK/

4. Press the II PLAY/PAUSE key (14/1). The playback starts.

The ﬁ rst track number selected appears in the display. The

words „Cd", „ESP" and „MEMORY" appear in the display.

Press this button to pause brieﬂ y the playback.

5. Press once the STOP key (16/2) to stop the playback while

retaining the program. The MEMORY control lamp goes out.

6. To resume the playback of the program press ﬁ rst the

PROGRAM key once and then the II PLAY/PAUSE key.

7. To delete the program (in stop mode) ﬁ rst press the PRO-

GRAM button and then the STOP button.

The device stops automatically once the entire sequence of pro-

grammed tracks is completed. The MEMORY control lamp goes

out. The programmed order of tracks remains in the memory

until you change to a different mode, remove the CD from the

CD compartment or switch off the device.

It is also possible to combine the programmed tracks with the

REPEAT function. After you have programmed and started

the device, please press the REPEAT button (15/5) up to three

times and then you can use the functions as described under

„REPEAT".

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in

MP3 format. The device also supports all standard CD types:

CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 200 tracks

can be compressed and stored on these CDs. Your machine

detects an MP3 CD automatically (the total number of tracks

and folders appears in the display). If you would like to play one

of these CDs, proceed as described under „Playing CDs/MP3".

Tracks can be programmed as described under „Playing Back

Programmed Tracks".

Please note:

There are a number of different recording and compression

methods, as well as quality differences between CDs and self-

recorded CDs.

Furthermore, the music industry does not adhere to ﬁ xed

standards (copy protection).

For these reasons it is possible that in rare cases there are

problems with the playback of CDs and MP3 CDs. This is not a

malfunction of the device.