DJI MATRICE 200 V2 Kurzanleitung Seite 4

Cendence S Remote Controller
The CENDENCE S remote controller features DJI's OCUSYNC
TM
up to 5 mi (8 km).* While flying the aircraft, you have a HD live view directly within the DJI Pilot app on your paired device
for a precise and responsive flying experience. Dual frequency* support makes the HD video downlink more stable. In Dual
Remote Controller Mode, two remote controllers control the aircraft and camera separately, even when they are up to 656
feet (200 m) apart.*
The remote controller works with a WB37 Intelligent Battery, which can be fully charged via the charging port in about 2 hours with
the standard charger, or with the Intelligent Battery Charging Hub* in about 1 hour and 11 minutes. The maximum run time of the
remote controller is approximately 4 hours.*
4
Folded
27. CAN Bus Port (Extension Port)
28. Micro USB Port
29. SDI Port (for Video Output)
30. Right Lever
31. Right Dial (Gimbal Pan)
32. AF Button (Autofocus)
33. Record Button
34. Shutter Button
35. Customizable Buttons (C1-C4)
* The remote controller can reach its maximum transmission distance (FCC) in an unobstructed area with no electro-magnetic interference at an altitude of
about 400 feet (120 meters). The actual maximum transmission distance may be less than the distance mentioned above due to interference in the operating
environment, and the actual value will fluctuate according to the strength of interference.
To comply with local regulations, the 5.8 GHz frequency is not available in some countries and regions.
For more information about Dual Remote Controller mode, please refer to the user manual.
The Charging Hub can be purchased separately from the official DJI website.
Maximum run time is estimated in a lab environment without supplying power to a smart device or monitor, for reference only.
1
2
3
6
5
6
7
14
10
11
12
13
9
2.0 technology for a maximum transmission distance of
TM
1. Mobile Device Holder
2. Antennas
3. Monitor Mounting Bracket
4. USB Port (Reserved Port)
5. Control Sticks
6. Strap Hook
7. Focal Adjustment Knob
8. Return-to-Home (RTH) Button
9. Power Port
10-13. Reserved Buttons
14. Pause Button
15. Power Button
16. Remote Control Display
17. Camera Settings Dial
18. Customizable Button Setting Menu
17
8
19. Customizable Buttons (BA-BH)
20. Support Rig
19
21. Left Lever
18
16
22. Left Dial (Gimbal Pitch)
23. Flight Mode Switch
15
24. Handle Bar
25. USB Port
20
(for Mobile Device Connection)
26. HDMI A Port (for Video Output)
35
21
25
22
23
24
35
26 27 28 29
33
30
31
32
34
3