Herunterladen Diese Seite drucken

Farfisa FP51AB Bedienungsanleitung Seite 8

Con btf01

Werbung

Smontaggio dei moduli
IT
Per smontare i moduli seguire le istruzioni
seguenti:
togliere alimentazione all'impianto agendo
sull'interruttore generale del sistema.
Smontare la cornice decorativa (figura 6).
Rimuovere il telaio dalla scatola da incasso
(figura 7).
Rimuovere le morsettiere dai moduli ALBA
(figura 8) o, se si tratta della seconda o terza
scatola da incasso, rimuovere il cavo lungo
Art. EC733 dal primo modulo (figura 9a). Ri-
muovere dall'ultimo modulo l'eventuale cavo
lungo Art. EC733 che collega il modulo con
la scatola da incasso successiva (figura 9b).
Scollegare i cavi che collegano i moduli tra
di loro (figura 10).
Smontare i moduli (figura 11).
3
1
Fig. Abb.6
Removing modules
EN
To disassemble the modules follow the instruc-
tions below:
switch OFF the power from the video intercom
system by turning OFF the system's main
switch.
Remove the hood cover (figure 6).
Unscrew the frame from the box (figure 7).
Remove the terminal block from the audio-vid-
eo module (figure 8) or, if it is the second
or third wall box, remove the long flat cable
Art. EC733 from the first module (figure 9a).
Remove any long flat cable Art. EC733 from
the last module that connects the module to
the next wall box (figure 9b).
Disconnect the flat cables connecting the
modules to each other (figure 10).
Remove the modules (figure 11).
1
2
2
3
Fig. Abb.7
Démontage des modules
FR
Pour démonter les modules, suivre ces ins-
tructions:
Placer l'équipement portier-vidéo hors tension
en tournant l'interrupteur général.
Retirer la plaque de décoration (figure 6).
Retirer le châssis de la boite d'encastrement
(figure 7).
Retirer le bornier du module audio-vidéo
(figure 8) et s'il s'agit de la deuxième ou de
la troisième boite d'encastrement, retirer le
câble long Art. EC733 du premier module
(figure 9a). Retirer le câble long Art. EC733
du dernier module le reliant à la boite d'en-
castrement suivante (figure 9b).
Déconnecter les câbles de connexion des
modules entre eux (figure 10).
Démonter les modules (figure 11).
J1
1
2
3
Fig. Abb.8
P1
VR1
VR2
- 8 -
Mi 2545

Werbung

loading

Verwandte Produkte für Farfisa FP51AB

Diese Anleitung auch für:

Alba-serie