Declaration Of Conformity - JBL PRO POWER GTi Einbauanleitung

Woofer Installation
Figure 7.
Mounting the C508GTi or C608GTi woofer
where there is no factory speaker location.
To mount the C508GTi in factory locations, omit
the grille and grille tray.
Figure 8.
Mounting the C608GTi woofer in standard 5-1/4"
holes (in many Japanese and American automo-
biles)
Figure 9.
Mounting the C608GTi woofer in 165mm holes
(in many European and American automobiles)
Electrical Connections and Crossover Adjustments
Figure 10.
Connecting the speakers and the amplifier to
the crossover
Figure 11.
Adjust the crossover using the jumpers
provided
PRO POWER TM

DECLARATION OF CONFORMITY

We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility, that the products
described in this owner's manual are in compliance
with technical standards:
EN 50081-1:1992
EN 50082-1:1997
Emmanuel Millot
Harman Consumer International
Chateau-du-Loir, France 7/01
03