Philips GC7929 PerfectCare Compact Plus Gebrauchsanleitung Seite 22

22 ENGLISH
Problem
The iron does
not produce any
steam.
No steam
comes out of
the soleplate,
the light of
the CALC-
CLEAN button
flashes and the
appliance beeps.
Possible cause
There is not enough
water in the water
tank.
You did not press the
steam trigger.
The steam function
has been disabled
until you have
performed the Calc-
Clean process.
At the start of your
ironing session, the
steam trigger has not
been pressed long
enough.
You have not done or
have not completed
the Calc-Clean
process.
Solution
Fill the water tank.
Press and hold the
steam trigger until
steam comes out. It
may take up to 30
seconds until steam
comes out.
Press and hold the
steam trigger until
steam comes out.
Perform the Calc-
Clean process to
restore the steam
function. (see chapter
'Cleaning and
maintenance')
Press and hold the
steam trigger until
steam comes out. It
may take up to 30
seconds until steam
comes out.
Perform the Calc-
Clean process to
enable the steam
function again (see
chapter 'Cleaning and
maintenance').