ASROCK X370M Pro4 R2.0 Bedienungsanleitung Seite 39

D C B
D C B
D C B A
D C B A
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location D by default. Skip Step 3
A
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
A
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
20 o
X370M Pro4 R2.0
AB350M Pro4 R2.0
A320M Pro4 R2.0
37