Beper 70.210 Betriebsanleitung Seite 13

Mist Fan Use instructions
If you decide not to use the appliance any longer, make it unserviceable by simply cutting
the supply cable after disconnecting the plug from the socket. Also make any dangerous
parts unserviceable, especially for children who could play whit the appliance.
Let other potential users read these instructions.
Keep these instructions.
INSTRUCTIONS FOR USE
Do not plug the supply cord before assembly every the parts of the water spray fan.
Before using, check the integrity of the supply cord and eventually remove possible nodes.
Make sure that the wattage and main voltage correspond to the instructions on the rating label.
Place the fan on a flat and stable surface.
Do not touch the fan with wet hands.
Place the fan to a reasonable distance from walls, doors, windows or every object that could avoid
the appliance to work in the correct way.
Do not use the fan near inflammable objects or explosive substances.
Do not cover the body or grid of the fan when the appliance is working.
Do not plug objects into the grid or inside the appliance.
Do not introduce objects into the grid.
This water spray fan does not be used by children or disabled people
Before assembly, move or clean the water spray fan, unplug the appliance.
If you need the appliance make it repaired, this has to be done by professional people only.
Only use accessories that have been supplied with the appliance.
After using unplug the cord from the power supply.
DESCRIPTION Fig. 1
1. Front grid with spray
2. Blades nuts
3. Blades
4. Hoop nest
5. Rear grid nut
6. Rear grid
7. Moteur axis
8. Motor
9. Inclination setting axis
10. Telescopic tube
11. Telescopic tube screw
12. Fixation tube screw
13. Tube
14. Base fixation screw
15. Base cover
16. Base
17. Control panels
18. Spray tube
19. Tank
20. Tank cover
21. Setting spray button
22. Switch ON/OFF I/0
23. Supply cord
24. Remote control
13