Aux In Mode; Alarms And Sleep; Alarms - Clint L1 Bedienungsanleitung

3.4 Aux In mode

Aux In mode plays audio from an external source such as an MP3 player.
To play audio with Aux In mode
1. Turn on the L1 radio.
2. Connect the external audio source to the Line In socket.
3. Press MODE button until the display shows Auxiliary Input.
4. Adjust the volume of L1 as required.

4 Alarms and sleep

4.1 Alarms

To set alarms
Turn L1 on.
To set or change alarm 1, press ALARM once, then press Select .
To set or change alarm 2, press ALARM twice, then press Select .
To exit alarm setting mode, press ALARM again.
The alarm setup prompts you for the following parameters. Select a
value for each parameter in turn turning the left/right knob and press
Select to confirm and move on to the next parameter.
www.clintdigital.com
15