Installation; Preparations - Sony DCBK-160A Installationsanleitung

Installation

Installation
Caution
If this option is installed incorrectly, personal injury or damage
to peripheral items may occur due to fire, shock, or other
accidental circumstances. To avoid such risks, installation
should be performed by qualified service personnel.

Preparations

Before installing the board into the VCR, first connect the
cables and harness to the connector panel.
Connect the red cable to the SDI IN connector, the orange
cable to the SDI OUT connector, and the harness to the 6-pin
connector.
16
harness
Connector panel
Red cable
Orange cable