Sage STM600 Kurzanleitung Seite 3

• Position the appliance on a
stable, heat resistant, level, dry
surface away from the edge and
do not operate on or near a heat
source such as a hot plate, oven
or gas hob.
• Do not place the appliance on
or near a hot gas burner, electric
element or where it could touch
a heated oven.
• Position the appliance at least
20cm from walls or heat/steam
sensitive materials and provide
adequate space above and on
all sides for air circulation.
• Do not operate the kettle on sink
drain board.
• Always ensure the appliance
is properly assembled before
connecting to a power outlet and
operating. Follow the instructions
provided in this book.
• The installation of a residual
current safety switch is
recommended to provide
additional safety when using
all electrical appliances. Safety
switches with a rated operating
current not more than 30mA
are recommended. Consult
an electrician for professional
advice.
• The glass jug must be used only
with the power base supplied.
Do not use on a range top.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
• Do not touch hot surfaces. Use
the handle for lifting and carrying
the glass jug.
• Attach the jug lid securely to the
glass jug before operation.
• Do not place anything on top of
the lid.
• Do not open the jug lid during
operation as scalding may occur.
• Extreme caution must be used
when moving the glass jug
containing hot liquid.
• Use caution when pouring water
from the glass jug as boiling
water and steam will scald. Do
not pour the water too quickly.
• To avoid scalding, never fill the
glass jug past the 'MAX' line
marking.
• Do not operate the appliance
without water. Always fill the
glass jug to at least the 'MIN'
marking. Should it be operated
without water, the boil-dry
protection will shut the power
off automatically. Allow the
appliance to cool before refilling.
EN
3