Assembly And Connection - Bartscher 2000D IV Bedienungsanleitung

5.2 Assembly and connection

1. Unpack machine and remove all packaging.
2. Fix the machine to a wall that can withstand the weight of the device.
3. Never fix the machine directly above a power plug or wall plug.
4. During assembly, mind the electric cords imbedded in walls.
5. Do not suspend the device from bathroom ceilings or near shower cabins.
6. Do not use in closed spaces.
WARNING! Fire hazard!
Radiator extremely heated during use!
Remember not to keep any inflammable materials around the area where the radiator
is placed. Keep a safe distance from all sides of device.
7. In order to use all three heating-levels
the radiator has to be placed at least
1800 mm from the floor. From the right
and left side a distance of 200 mm is
recommended, from the top, 300 mm is
the recommended distance away from
objects.
8. Make drill holes in the wall to accommo-
date screws. Next, fasten screw casings
with screws in the wall and attach the
radiator.
9. Insert the plug in a single, grounded
receptacle. Make sure the power cord is
lose and does not get entagled.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance! Take note of the security advice!
ill. 2
- 21 -