Assembly Steps - Avtek Speaker Pro Gebrauchsanleitung

Assembly steps

1. Fix the speaker into position, active speaker shall be placed on the left and slave
speakers on the right.
2. Wall bracket shall be mounted to the wall as follows.
3. Slave speaker: connect the active speaker and slave speaker using the amplifier
cable. Fix one end of the safety cable to the wall bracket, and screw the other end to
the speaker bracket. Then hang the speaker onto bracket as shown as follows.
4. Please follow the above method to fix the safety cable to the Active speaker, then
plug in the power cord.
5. Connect all input/output cables.
1. slave speaker
2. amplifier cable
3. safety rope
6