Whispbar K997W Montageanleitung Seite 15

EN
Fitting Kit
K997W
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Clamps directly to edge of roof under the
doors
Please check the front of this manual for
information relating specifically to your
vehicle.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
15