Recharging The Batteries - SCREENLINE SL2380 Anwenderhandbuch

• by pressing the sensitive area
on the left hand (2) for more
than 2 seconds
The blind will move until reaching the
completely open position.
To stop the movement at any time,
quickly touch the sensitive area in
any position.
The blind can be lowered in two dif-
ferent ways:
• by quickly sliding your finger along the sensitive area,
from left to right (2 to 1)
• by pressing the sensitive area on the right hand (1) for
more than 2 seconds
The blind will move until reaching the completely closed po-
sition.
To stop the movement at any time, quickly touch the sensitive
area in any position.
SLAT TILTING FOR VENETIAN BLINDS
Battery module in vertical position:
Quickly touch (for less than two seconds) the upper (2) or lo-
wer (1) area until reaching the required tilting.
Battery module in horizontal position:
Quickly touch (for less than two seconds) the left (2) or right (1)
area until reaching the required tilting.

RECHARGING THE BATTERIES

If the batteries need recharging, the LED will flash following an
up or down command.
Recharging is automatically controlled
by the battery module.
To recharge the batteries:
1. Detach the battery module from
its base plate
2. Plug the power supplier into a po-
wer socket
12
2 1
Micro
USB