Electromagnetic Fields (Emf); Preparing For Use - Philips HP6368 Bedienungsanleitung

EnglisH
8
general
- The appliance complies with the internationally approved IEC safety
regulations and can be safely used in the bath or shower and cleaned
under the tap (Fig. 2).
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

Preparing for use

charging
It takes approximately 10 hours to charge the batteries fully.
Make sure your hands and the appliance are dry when you prepare the
appliance for charging.
When the batteries are fully charged, the appliance has a cordless shaving
time of up to 40 minutes.
Always switch off the appliance before you connect it to the mains.
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the appliance (1). Plug the adapter
into a wall socket (2) (Fig. 3).
The charging light on the adapter goes on.
,
Note: The charging light on the adapter remains on after the appliance is
fully charged.
3 Unplug the appliance when the batteries are fully charged (i.e. after
approx. 10 hours).
Note: Do not leave the adapter plugged in for longer than 14 hours, as this
may affect the lifetime of the batteries.