Philips HP6368 Bedienungsanleitung Seite 11

cleaning the shaving head
1 Press the on/off button to switch off the appliance (Fig. 7).
2 Pull the shaving head off the appliance (Fig. 6).
Do not exert pressure on the double shaving foil to avoid damage.
3 Push the cutting unit release slide to the right (1) and remove the
cutting unit (2) (Fig. 10).
4 Clean the cutting unit and the inside of the shaving head with the
cleaning brush. Also brush away any hairs that have collected under
the trimmer (Fig. 11).
Caution: Do not brush the foil to avoid damage to the brush or the foil.
5 You can also rinse the cutting unit and the shaving head under the
tap (Fig. 12).
6 To dry the cutting unit and the shaving head, shake them
firmly (Fig. 13).
7 Place the cutting unit back onto the shaving head ('click') (Fig. 14).
Note: Make sure that the shaving head and the cutting unit are completely
dry before you reattach them onto the appliance.
maintenance
1 Lubricate the cutting unit (double shaving foil and trimmer) with a
drop of sewing machine oil twice a year (Fig. 15).
2 After you have put the oil on the cutting unit, assemble it onto the
handle and let the appliance operate briefly to spread the oil.
replacement
The shaving head and the adapter of the appliance can be replaced. If you
need to replace one or more parts, go to your Philips dealer or an
authorised Philips service centre. If you use the Ladyshave two or more
times a week, we advise you to replace the shaving head after one or two
years or if it is damaged.
EnglisH
11