Lenovo THINKPAD STACK PROFESSIONAL KIT Benutzerhandbuch Seite 9

Turn on the router
Press the power button for one second until its green LED flashes.
Turn off the router
Press and hold the power button for two seconds until its LED is off.
Connect the router to network
There are two methods to connect the router to network:

Turn on the router. Then connect an RJ-45 network cable to the Ethernet connector on the
router.

Turn on the router. Then connect an external 3G or 4G network card to the USB 2.0 connector
on the router.
After the network connection is established, the power button LED stays on.
Reset the router to default settings
1. Turn on the router.
2. Insert a needle or a straightened paper clip into the emergency-reset hole to press and hold the
reset button for five seconds.
3. Release the reset button. The power button LED flashes.
4. Wait until the power button LED stays on. The router is successfully reset to default settings.
8