Using the kit
Using the speaker
Before using the speaker, pair it with a mobile phone, computer, or other device. To pair the
speaker, do the following:
1. Ensure that the speaker is powered on.
2. Press and hold the power button for about three seconds. The speaker beeps for two times and
the speaker icon indicator starts flashing.
3. Enable the Bluetooth function on the pairing device, and pair with "ThinkPad Stack Bluetooth
Speaker." The pairing process begins.
4. After the speaker beeps again for two times and the speaker icon indicator stops flashing, the
speaker has been successfully paired with the pairing device.
After the speaker is paired with a device, it is ready for your use. You can take the following
operations:
Turn on the speaker
Press the power button until the green light-emitting diode (LED) in the center of the power button
and the speaker icon indicator are solid on.
Turn off the speaker
Press the power button until the power button LED and the speaker icon indicator are off.
Re-pair after a disconnection
Press the power button.
Turn up the volume
Press the volume-up (+) button.
6