Lenovo THINKPAD STACK PROFESSIONAL KIT Benutzerhandbuch Seite 10

Using the hard disk drive
You can use the hard disk drive through either direct access or remote access.
Direct access
Connect one end of the USB 3.0 cable to the micro USB 3.0 connector on the hard disk drive and
the other end to an available USB connector on your computer. A USB 3.0 connector is
recommended for maximum data transfer speed.
Remote access
1. Stack the hard disk drive to the router and turn on the router.
2. Download and install the ThinkPad Stack Assist application on your mobile phone or computer.
For more information, refer to ThinkPad Stack Assist in the later part of this document.
Open the application and follow the instructions on the screen to access the hard disk drive.
Using the power bank
Press the battery status button to check the battery status before using the power bank.
Stack a device to the power bank
When you stack a device to the power bank, ensure that Pogo pins of the device align with Pogo
pads of the power bank, or Pogo pads of the device align with Pogo pins of the power bank.
Charge the speaker
Stack the speaker to the power bank, and the power bank starts to charge the speaker.
Supply power to the router
Stack the router to the power bank and press the power button of the router to power on the router.
The power bank starts to supply power to the router.
Charge mobile phones
Connect your mobile phone to the USB 2.0 connector on your power bank. The power bank can
9